LinearResamplerAlign.h

Go to the documentation of this file.

// --------------------------------------------------------------------------
//                   OpenMS -- Open-Source Mass Spectrometry
// --------------------------------------------------------------------------
// Copyright The OpenMS Team -- Eberhard Karls University Tuebingen,
// ETH Zurich, and Freie Universitaet Berlin 2002-2023.
//
// This software is released under a three-clause BSD license:
//  * Redistributions of source code must retain the above copyright
//    notice, this list of conditions and the following disclaimer.
//  * Redistributions in binary form must reproduce the above copyright
//    notice, this list of conditions and the following disclaimer in the
//    documentation and/or other materials provided with the distribution.
//  * Neither the name of any author or any participating institution
//    may be used to endorse or promote products derived from this software
//    without specific prior written permission.
// For a full list of authors, refer to the file AUTHORS.
// --------------------------------------------------------------------------
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
// ARE DISCLAIMED. IN NO EVENT SHALL ANY OF THE AUTHORS OR THE CONTRIBUTING
// INSTITUTIONS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
// OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
// WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
// OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// --------------------------------------------------------------------------
// $Maintainer: Hannes Roest $
// $Authors: Hannes Roest $
// --------------------------------------------------------------------------
 
#pragma once
 
#include <OpenMS/FILTERING/TRANSFORMERS/LinearResampler.h>
#include <OpenMS/CONCEPT/Macros.h>
 
namespace OpenMS
{
 
  class OPENMS_DLLAPI LinearResamplerAlign :
    public LinearResampler
  {
 
public:
 
    LinearResamplerAlign()
    {
      defaults_.setValue("spacing", 0.05, "Spacing of the resampled output peaks.");
      defaults_.setValue("ppm", "false", "Whether spacing is in ppm or Th");
      defaultsToParam_();
    }
 
    template <class SpecT>
    void raster(SpecT& container)
    {
      //return if nothing to do
      if (container.empty()) return;
 
      typename SpecT::iterator first = container.begin();
      typename SpecT::iterator last = container.end();
 
      double end_pos = (last - 1)->getMZ();
      double start_pos = first->getMZ();
      int number_resampled_points = (int)(ceil((end_pos - start_pos) / spacing_ + 1));
 
      std::vector<typename SpecT::PeakType> resampled_peak_container;
      populate_raster_(resampled_peak_container, start_pos, end_pos, number_resampled_points);
 
      raster(container.begin(), container.end(), resampled_peak_container.begin(), resampled_peak_container.end());
 
      container.swap(resampled_peak_container);
    }
 
    template <typename SpecT>
    void raster_align(SpecT& container, double start_pos, double end_pos)
    {
      //return if nothing to do
      if (container.empty()) return;
 
      if (end_pos < start_pos)
      {
        std::vector<typename SpecT::PeakType> empty;
        container.swap(empty);
        return;
      }
 
      typename SpecT::iterator first = container.begin();
      typename SpecT::iterator last = container.end();
 
      // get the iterators just before / after the two points start_pos / end_pos
      while (first != container.end() && (first)->getMZ() < start_pos) {++first;}
      while (last != first && (last - 1)->getMZ() > end_pos) {--last;}
 
      int number_resampled_points = (int)(ceil((end_pos - start_pos) / spacing_ + 1));
 
      std::vector<typename SpecT::PeakType> resampled_peak_container;
      populate_raster_(resampled_peak_container, start_pos, end_pos, number_resampled_points);
 
      raster(first, last, resampled_peak_container.begin(), resampled_peak_container.end());
 
      container.swap(resampled_peak_container);
    }
 
    template <typename PeakTypeIterator, typename ConstPeakTypeIterator>
    void raster(ConstPeakTypeIterator raw_it, ConstPeakTypeIterator raw_end, PeakTypeIterator resample_it, PeakTypeIterator resample_end)
    {
      OPENMS_PRECONDITION(resample_it != resample_end, "Output iterators cannot be identical") // as we use +1
      // OPENMS_PRECONDITION(raw_it != raw_end, "Input iterators cannot be identical")
 
      PeakTypeIterator resample_start = resample_it;
 
      // need to get the raw iterator between two resampled iterators of the raw data
      while (raw_it != raw_end && raw_it->getMZ() < resample_it->getMZ())
      {
        resample_it->setIntensity(resample_it->getIntensity() + raw_it->getIntensity());
        raw_it++;
      }
 
      while (raw_it != raw_end)
      {
        //advance the resample iterator until our raw point is between two resampled iterators
        while (resample_it != resample_end && resample_it->getMZ() < raw_it->getMZ()) {resample_it++;}
        if (resample_it != resample_start) {resample_it--;}
 
        // if we have the last datapoint we break
        if ((resample_it + 1) == resample_end) {break;}
 
        double dist_left =  fabs(raw_it->getMZ() - resample_it->getMZ());
        double dist_right = fabs(raw_it->getMZ() - (resample_it + 1)->getMZ());
 
        // distribute the intensity of the raw point according to the distance to resample_it and resample_it+1
        resample_it->setIntensity(resample_it->getIntensity() + raw_it->getIntensity() * dist_right / (dist_left + dist_right));
        (resample_it + 1)->setIntensity((resample_it + 1)->getIntensity() + raw_it->getIntensity() * dist_left / (dist_left + dist_right));
 
        raw_it++;
      }
 
      // add the final intensity to the right
      while (raw_it != raw_end)
      {
        resample_it->setIntensity(resample_it->getIntensity() + raw_it->getIntensity());
        raw_it++;
      }
    }
 
    template <typename PeakTypeIterator, typename ConstPeakTypeIterator>
#ifdef OPENMS_ASSERTIONS
    void raster(ConstPeakTypeIterator mz_raw_it, ConstPeakTypeIterator mz_raw_end,
        ConstPeakTypeIterator int_raw_it, ConstPeakTypeIterator int_raw_end,
        PeakTypeIterator mz_resample_it, PeakTypeIterator mz_resample_end,
        PeakTypeIterator int_resample_it, PeakTypeIterator int_resample_end)
#else
    void raster(ConstPeakTypeIterator mz_raw_it, ConstPeakTypeIterator mz_raw_end,
        ConstPeakTypeIterator int_raw_it, ConstPeakTypeIterator /* int_raw_end */,
        PeakTypeIterator mz_resample_it, PeakTypeIterator mz_resample_end,
        PeakTypeIterator int_resample_it, PeakTypeIterator /* int_resample_end */)
#endif
    {
      OPENMS_PRECONDITION(mz_resample_it != mz_resample_end, "Output iterators cannot be identical") // as we use +1
      OPENMS_PRECONDITION(std::distance(mz_resample_it, mz_resample_end) == std::distance(int_resample_it, int_resample_end),
          "Resample m/z and intensity iterators need to cover the same distance")
      OPENMS_PRECONDITION(std::distance(mz_raw_it, mz_raw_end) == std::distance(int_raw_it, int_raw_end),
          "Raw m/z and intensity iterators need to cover the same distance")
      // OPENMS_PRECONDITION(raw_it != raw_end, "Input iterators cannot be identical")
 
      PeakTypeIterator mz_resample_start = mz_resample_it;
 
      // need to get the raw iterator between two resampled iterators of the raw data
      while (mz_raw_it != mz_raw_end && (*mz_raw_it) < (*mz_resample_it) )
      {
        (*int_resample_it) = *int_resample_it + *int_raw_it;
        ++mz_raw_it;
        ++int_raw_it;
      }
 
      while (mz_raw_it != mz_raw_end)
      {
        //advance the resample iterator until our raw point is between two resampled iterators
        while (mz_resample_it != mz_resample_end && *mz_resample_it < *mz_raw_it)
        {
          ++mz_resample_it; ++int_resample_it;
        }
        if (mz_resample_it != mz_resample_start)
        {
          --mz_resample_it; --int_resample_it;
        }
 
        // if we have the last datapoint we break
        if ((mz_resample_it + 1) == mz_resample_end) {break;}
 
        double dist_left =  fabs(*mz_raw_it - *mz_resample_it);
        double dist_right = fabs(*mz_raw_it - *(mz_resample_it + 1));
 
        // distribute the intensity of the raw point according to the distance to resample_it and resample_it+1
        *(int_resample_it) = *int_resample_it + (*int_raw_it) * dist_right / (dist_left + dist_right);
        *(int_resample_it + 1) = *(int_resample_it + 1) + (*int_raw_it) * dist_left / (dist_left + dist_right);
 
        ++mz_raw_it;
        ++int_raw_it;
      }
 
      // add the final intensity to the right
      while (mz_raw_it != mz_raw_end)
      {
        *int_resample_it = *int_resample_it + (*int_raw_it);
        ++mz_raw_it;
        ++int_raw_it;
      }
    }
 
    template <typename PeakTypeIterator>
    void raster_interpolate(PeakTypeIterator raw_it, PeakTypeIterator raw_end, PeakTypeIterator resample_it, PeakTypeIterator resampled_end)
    {
      // OPENMS_PRECONDITION(resample_it != resampled_end, "Output iterators cannot be identical")
      OPENMS_PRECONDITION(raw_it != raw_end, "Input iterators cannot be identical") // as we use +1
 
      PeakTypeIterator raw_start = raw_it;
 
      // need to get the resampled iterator between two iterators of the raw data
      while (resample_it != resampled_end && resample_it->getMZ() < raw_it->getMZ()) {resample_it++;}
 
      while (resample_it != resampled_end)
      {
        //advance the raw_iterator until our current point we want to interpolate is between them
        while (raw_it != raw_end && raw_it->getMZ() < resample_it->getMZ()) {raw_it++;}
        if (raw_it != raw_start) {raw_it--;}
 
        // if we have the last datapoint we break
        if ((raw_it + 1) == raw_end) {break;}
 
        // use a linear interpolation between raw_it and raw_it+1
        double m = ((raw_it + 1)->getIntensity() - raw_it->getIntensity()) / ((raw_it + 1)->getMZ() - raw_it->getMZ());
        resample_it->setIntensity(raw_it->getIntensity() + (resample_it->getMZ() - raw_it->getMZ()) * m);
        resample_it++;
      }
 
    }
 
protected:
 
    bool ppm_;
 
    void updateMembers_() override
    {
      spacing_ =  param_.getValue("spacing");
      ppm_ =  (bool)param_.getValue("ppm").toBool();
    }
 
    template <typename PeakType>
    void populate_raster_(std::vector<PeakType>& resampled_peak_container,
        double start_pos, double end_pos, int number_resampled_points)
    {
      if (!ppm_)
      {
        // generate the resampled peaks at positions origin+i*spacing_
        resampled_peak_container.resize(number_resampled_points);
        typename std::vector<PeakType>::iterator it = resampled_peak_container.begin();
        for (int i = 0; i < number_resampled_points; ++i)
        {
          it->setMZ(start_pos + i * spacing_);
          ++it;
        }
      }
      else
      {
        // generate resampled peaks with ppm distance (not fixed)
        double current_mz = start_pos;
        while (current_mz < end_pos)
        {
          PeakType p;
          p.setIntensity(0);
          p.setMZ(current_mz);
          resampled_peak_container.push_back(p);
 
          // increment current_mz
          current_mz += current_mz * (spacing_ / 1e6);
        }
      }
    }
  };
 
}